Person:
SARIALİOĞLU GÜNGÖR, AYÇA

Loading...
Profile Picture

Status

Kurumdan Ayrılmıştır

Organizational Units

Job Title

First Name

AYÇA

Last Name

SARIALİOĞLU GÜNGÖR

Name

Email Address

Birth Date

Search Results

Now showing 1 - 10 of 19
  • Publication
    Impact of a Surface Sealant Application on the Color Stability of a Nano-hybrid Composite Resin
    (2021-12-01T00:00:00Z) Sarıalioğlu Güngör, Ayça; Dönmez, Nazmiye; Kahya, Deniz Selin; Hergüner Siso, Şeyda; SARIALİOĞLU GÜNGÖR, AYÇA; DÖNMEZ, NAZMİYE
    Objective: Mouthwashes containing chlorhexidine can cause discoloration in restorative materials when used for the long-term. To prevent staining of a restorative material, several protective materials are used. The aim of this in vitro study was to evaluate the impact of a surface sealant on the color stability of a nano-hybrid composite resin material immersed in different mouthwashes. Methods: A total of 42 composite resin discs (10x2 mm) were prepared with a nano-hybrid composite resin (Herculite XRV Ultra) using Teflon moulds. The composite specimens were first divided into two groups (with or without a surface sealant) then into three subgroups (n=7) according to the mouthwashes (Gengigel, Oderol, and Chlorhex). After SS application to 21 specimens, all the discs were subjected to baseline color measurements using a spectrophotometer according to the Commission Internationale de l’Eclairage L*a*b* system. The specimens underwent thermal cycling. Following immersion in different mouthwashes for 24 hours, the color measurements were repeated. The ∆E data were assessed using Kruskal-Wallis one-way ANOVA. Mann-Whitney U test was performed for different immersion mouthwashes (p<0.5). Results: Statistically significant differences (p<0.5) were found between the unsealed composite specimens immersed in Chlorhex and the other mouthwashes in terms of ∆E values. The Chlorhex appeared to be associated with the most severe alteration in color (5.14±0.83), followed by Gengigel (2.21±1.46) and Oderol (1.94±1.75). There were no statistically significant differences (p>0.05) between the sealed and unsealed composite specimens in terms of the color changes. Conclusion: The application of a low viscosity liquid surface sealant material did not show the expected effect on the color stability of a nano-hybrid composite resin in terms of three different mouthwashes.
  • Publication
    Perceptions of dental students towards online education during the COVID-19 pandemic
    (2021-12-01T00:00:00Z) Sarıalioğlu Güngör, Ayça; Şeşen Uslu, Yeşim; SARIALİOĞLU GÜNGÖR, AYÇA; DÖNMEZ, NAZMİYE
    Purpose: This study evaluated the usage habits, attitudes, and perceptions of undergraduate dental students toward distance (online) learning and identified variables related to those attitudes. Materials and methods: The study included 1,605 undergraduate dental students who participated voluntarily. The data collection tool consisted of a distance learning attitude scale, a questionnaire on personal information, and open-ended questions. The perceptions of dental students to distance education according to the year and type of dental school they attended were evaluated. Results: Most students expressed that distance learning in dental courses was not as effective as traditional face-to-face education (59.1%, n=949). While students studying at state universities had a more negative view of distance education, the satisfaction scores of the first-year students were found to be significantly lower than the other students (p<0.05). Conclusion: Dental students were generally unhappy with the interruption of traditional education caused by COVID-19 and having to continue their education online. However, under the circumstances, they saw it as an advantage allowing them to continue their education and avoid a complete suspension.
  • Publication
    The Effect of Whitening Dentifrices on the Surface Roughness of Different Composite Resins
    (2021-04-22T00:00:00Z) Şeşen Uslu, Yeşim; Doğruer, Işıl; Sarıalioğlu Güngör, Ayça; Ulukapı, Haşmet; SARIALİOĞLU GÜNGÖR, AYÇA
    Aim: The aim of this in-vitro study was to evaluate surface roughness (SR) of two different composite resins after toothbrushing with different whitening toothpastes.Materials and Methods: Filtek Z250 universal composite resin (3M) (3M ESPE, St. Paul, MN, USA) containing bis-GMA and Charisma Topaz (CT) nano-hybrid composite resin (Heraeus Kulzer, Wehrheim, Germany) without bis-GMA were used in the study. 50 disc-shaped specimens of 10 mm in diameter and 2 mm in thickness were prepared from each composite. The prepared discs were kept at 370C for 24 hours and then separated in 5 subgroups: G1 control (artificial saliva) group, G2 Colgate Optical White Active Charcoal (containing active carbon), G3 Yotuel (containing carbamide peroxide), G4 Opalescence (containing abrasive particle), and G5 Sensodyne, Promine (containing fluoride) pastes (n = 10).After initialmeasurements and SR1 values were recorded.The discs were brushed in continuous mode with an electric toothbrush (Triumph Professional Care, Oral B Braun GmbH, Kronberg / Ts., Germany) in a slurry (1:3 g/ml) of the tested toothpastes (1.5 N). Samples were brushed twice a day for 4 weeks and 8 weeks to mimic the daily routine. Samples were conserved in artificial saliva between brushing cycles. After 4 weeks and 8 weeks cycles, SR2 and SR3 values were recorded. The obtained data were analyzed by three-way mixed ANOVA.Results: There were no statistically significant differences between the two composite resin materials (p=0.575). When the whitening dentifrices groups were compared f o r both ma t e r i a l s , there was no statistical difference after 4 weeks and 8 weeks. The SR value of the control groups (0,948 ± 0,118 3M, 1,006 ± 0,187 CT) were significantly lower than the Charcoal groups (1,672 ± 0,314 3M, 1,653 ± 0,265 CT) at the end of 8 weeks (p<.05).Conclusion: After simulated brushing with whitening toothpastes, similar degree of roughness was observed on the composite resins tested.Keywords: surface roughness, toothbrushing, whitening toothpaste, resin composite
  • Publication
    Evaluating Cytotoxicity of Dentin Bonding Adhesive Systems on Human Dental Pulp Stem Cells
    (2022-04-23T00:00:00Z) Kazak, Mağrur; Sarıalioğlu Güngör, Ayça; Özman, Zeynep; Dönmez, Nazmiye; SARIALİOĞLU GÜNGÖR, AYÇA; ÖZMAN, ZEYNEP; DÖNMEZ, NAZMİYE
  • Publication
    Türkiye-deki Diş Hekimleri ve Hastaların Tele-Diş Hekimliğine İlişkin Bilgi ve Farkındalıklarının Değerlendirilmesi
    (2021-10-07T00:00:00Z) Özveren, Neslihan; Sevinç, Büşra; Sarıalioğlu Güngör, Ayça; Baltacı, Ezgi; Özgür, Özge; SARIALİOĞLU GÜNGÖR, AYÇA
  • Publication
    Influence of Etching Mode and Composite Type on Bond Strength to Biodentine Using a -No-Wait- Universal Adhesive
    (2021-07-01T00:00:00Z) Sarıalioğlu Güngör, Ayça; Alim, Betül Aycan; SARIALİOĞLU GÜNGÖR, AYÇA; UYSAL, BETÜL AYCAN
  • Publication
    Evaluating the Effects of Different Remineralization Agents on Initial Enamel Lesions In Vitro
    (2022-04-23T00:00:00Z) Sarıalioğlu Güngör, Ayça; Dalkılıç, Evrim; Alkan, Elif; Yılmaz Atalı, Pınar; Dağtekin, Dilek; SARIALİOĞLU GÜNGÖR, AYÇA; DALKILIÇ, EVRIM
  • Publication
    Dentin erosion preventive effects of various plant extracts: An in vitro atomic force microscopy, scanning electron microscopy, and nanoindentation study
    (2020-12-01T00:00:00Z) DÖNMEZ, NAZMİYE; SARIALİOĞLU GÜNGÖR, AYÇA; SARIALİOĞLU GÜNGÖR, AYÇA; DÖNMEZ, NAZMİYE
    The overall consumption of acidic beverages has become more common, making the prevention and treatment of dental erosion an important consideration. The aim of this in vitro study was to evaluate the effect of various plant extracts in preventing dentin erosion. Seven experimental groups (fluoride-free water, fluoride-containing mouthwash [Colgate Plax], green tea, rosehip, clove, pomegranate, and grape seed) were formed, each consisting of 20 bovine dentin samples. The specimens were exposed daily to demineralization and remineralization cycles three times per day over 5 days through a 5-min plant extract application before each erosive episode. Surface roughness, nanohardness values, and morphological changes on dentin surfaces were examined using atomic force microscopy (AFM), nanoindentation, and scanning electron microscopy (SEM). The data were subjected to Kruskal-Wallis and Friedman tests (p .05). Macromolecular deposits were observed both in the SEM and AFM images of the pomegranate, Colgate, and rosehip groups. It can be concluded that the clove extract group is more successful in preventing dentin erosion than the other groups. Green tea is also effective in preventing dentin erosion, similar to clove extract.
  • Publication
    Preventing Dentin Erosion By Using Plants? : An In Vitro Study.
    (2018-07-27T00:00:00Z) Sarıalioğlu Güngör, Ayça; Dönmez, Nazmiye; SARIALİOĞLU GÜNGÖR, AYÇA; DÖNMEZ, NAZMİYE
  • Publication
    Effect of Trichloroacetic Acid on the Bond Strength of Calcium Silicate-Based Cements: A Modified Push-Out Test
    (2021-10-01T00:00:00Z) Alim, Betül Aycan; Sarıalioğlu Güngör, Ayça; UYSAL, BETÜL AYCAN; SARIALİOĞLU GÜNGÖR, AYÇA
    Objective: This study aimed to investigate the effect of trichloroacetic acid (TCA) on the bond strength of calcium silicate-based cements to dentin. Methods: Ten single-rooted bovine teeth were sectioned longitudinally into slices 2 mm thick. Six holes were drilled with a 1.2 mm diamond bur in each dentin slice (totally 60 holes). Cotton pellets with TCA were applied to three holes of each slice for 1 min, whereas no acid was applied to the other three. The TCA and non-TCA groups were divided into three subgroups according to the material used: ProRoot mineral trioxide aggregate [(MTA); n=10], Harvard MTA (n=10), and Biodentine (n=10). After seven days, the dislodgement resistance of the materials was calculated using a universal resting machine The types of bond failure were examined under a stereomicroscope. Results: The TCA had no statistically significant effect on the bonding strength of the tested materials (p>0.05). The Harvard MTA subgroup had the lowest mean bond strength values (2.25 +/- 0.79 MPa), while the Biodentine subgroup had the highest (10.49 +/- 3.32MPa). The most common bond failure types were mixed in the ProRoot MTA subgroup (60%) and cohesive in the Harvard MTA (60%) and Biodentine (70%) subgroups. Conclusion: The bond strength of Biodentine is greater than those of ProRoot and Harvard MTA. TCA does not affect the push-out bond strength of MTA or Biodentine.