Person:
TIRIS, GİZEM

Loading...
Profile Picture

Status

Organizational Units

Job Title

First Name

GİZEM

Last Name

TIRIS

Name

Email Address

Birth Date

Search Results

Now showing 1 - 8 of 8
  • Publication
    Determination of active ingredients in antihypertensive drugs using a novel green HPLC method approach
    (2022-09-01T00:00:00Z) TIRIS, GİZEM; Mehmandoust, Amirhossein; Karimi, Fatemeh; ERK, NEVİN; TIRIS, GİZEM
    © 2022 Elsevier LtdA novel, sensitive, fast, and pratic RP-HPLC methods were presented for the quantitative amounts of Telmisartan (TEL) and Olmesartan (OLM) in the presence of Amlodipin (AML) in a binary mixture of pharmaceutical preparation. Waters Spherisorb ODS-2 C18 column was used for separation. These methods were valid over linearity ranges of 2.5–30 μμg/mlL, 2–85 μμg/mlL, and 2–35 μμg/mlL for OLM, TEL, and AML, respectively. The mobile phase system consisted of acetonitrile:methanol: phosphate buffer at pH 3.0 (65:5:30 v/v/v), and the flow rate was 1,5 mlL/min for OLM and AML. The mobile system-s other mixture (TEL and AML) was acetonitrile:methanol: phosphate buffer at pH 2.5 (65:5:30 v/v/v), and the flow rate was 1,5 mlL/min. These procedures were successfully applied to bulk, laboratory synthetic mixture, and medicinal dosage forms to use active ingredients quantitatively. The studied methods were validated according to ICH guidelines. In the developed HPLC method, the limit of detection values was found to be 0.020 μμg/mlL for TEL, 0.025 μμg/mlL for OML, and 0.070 μμg/mlL for AML. The correlation coefficients for the HPLC method were found to be 0.9938 for TEL, 0.9996 for OML, and 0.9982 for AML. The calibration range is between 2.5 and -30, 5–35, and 2–85 μμg/mlL for OLM, AML, and TEL, respectively. The proposed HPLC method is a convenient, effective, sensitive, green, and time-saving method for the rapid determination of TEL and OLM in the presence of AML.
  • Publication
    A novel stability-indicating method for determination of a new antidepressant effect of vortioxetine in a pharmaceutical formulation by using RP-HPLC
    (2020-12-01T00:00:00Z) TIRIS, GİZEM; Alver, Cansu; ERK, NEVİN; TIRIS, GİZEM
    Background: A novel rapid, accurate, and stability-indicating reversed-phase high performance liquid chromatographic (RP-HPLC) and first derivative spectrophotometric determination were explained for the assay of vortioxetine (VRT) in bulk and pharmaceutical formulations. For RP-HPLC method, optimal separation and determination of VRT were achieved with a Waters Symmetry C-18, (100 x 4.6 mm, 3.5 mu m) analytical column using a mobile phase consisting of methanol:0.05 M potassium dihydrogen phosphate (pH:3.0 +/- 0.05) (30:70, v/v) in isocratic mode with flow rate of 1.3 mL min(-1). Injection volume was 20 mu L. The maximum absorption wavelength of VRT is 225.0 nm; hence, 225.0 nm was studied as the detection wavelength and column at 50 degrees C temperature. The caffeine was used as the internal standard (IS). On the other hand, the first derivative spectrophotometric method for the analysis of vortioxetine was performed by measuring the amplitude at 251.7 and 272.6 nm.
  • Publication
    Trade-off efficacy and data processing strategy in the power of spectral resolution of co-formulated antihypertensive pharmaceuticals
    (2021-02-01T00:00:00Z) Rostom, Yasmin; Lotfy, Hayam M.; Ozturk, Meltem; Tiris, Gizem; ERK, NEVİN; Saleh, Sarah S.; TIRIS, GİZEM
    Versatile, extraction-free univariate spectrophotometric methods have been modified to get effective spectral resolution of mixtures in accordance with their feature challenges. The proposed methods have been applied and validated for analyzing some antihypertensive medicines in their co-formulated medicinal products. Two mixtures have been used: the first one [Mix I (OLM/ADB)] is composed of Olmesartan medoxomil (OLM) and Amlodipine besylate (ADB) with partly-overlapped spectra while the second [Mix II (TEL/HCT)] is made up Telmisartan (TEL) and Hydrochlorothiazide (HCT) with total-overlapped spectra. Induced dual wavelength, absorbance correction and ratio subtraction coupled with constant multiplication methods were applied to Mix I (OLM/ADB), while dual wavelength, advanced absorbance subtraction and constant center coupled with spectrum subtraction methods were applied to Mix II (TEL/HCT). Calibration graphs were established with good correlation coefficients. The methods exhibit significant advantages as simplicity, sensitivity, minimal data manipulation besides optimum robustness. Selectivity was inspected using lab-mixtures with diverse ratios. Accuracy, precision and repeatability were found to be within the acceptable limits. The proposed methods are good enough to be used for co-assay of analytes in combined forms without any interfering from excipients. Moreover, all results were estimated in accordance with ICH criteria and successfully compared with those of the reported methods applying t-test and F-test at 95% confidence level. Generally, these methods can be used efficiently for routine quality control testing. (C) 2020 Elsevier B.V. All rights reserved.
  • Publication

    A reusable and sensitive electrochemical sensor for determination of idarubicin in environmental and biological samples based on NiFe2O4 nanospheres anchored N-doped graphene quantum dots composite; an electrochemical and molecular docking investigation

    (2022-09-01T00:00:00Z) Mehmandoust, Mohammad; Pourhakkak, Pouran; TIRIS, GİZEM; Karimi-Maleh, Hassan; ERK, NEVİN; TIRIS, GİZEM
    An ultrasensitive and selective voltammetric sensor with ultra-trace level detection limit is introduced for idarubicin (IDA) determination in real samples. The as-synthesized nanocomposite was characterized by several techniques, including Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Raman spectroscopy, Energy-dispersive X-ray spectroscopy (EDX), and Field emission scanning electron microscopy (FESEM). The electrocatalytic performance of the developed electrode was observed by cyclic voltammetry (CV), differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS), and chronoamperometry. The limit of detection (LOD) of the developed sensor for idarubicin is 1.0 nM, and the response is found to be in the dynamic concentration range of 0.01-1.9 mu mol/L in a Britton-Robinson buffer (B-R, pH = 6.0). Moreover, the fabricated electrode illustrated high selectivity with good repeatability and reproducibility for diagnosing idarubicin as an anthracycline antileukemic drug. Furthermore, to evaluate the validity of the recommended method, three real samples, including human plasma, urine, and water samples, were analyzed with satisfactory recovery and compared with high-performance liquid chromatography (HPLC). The minor groove-binding mode of interaction was also supported by docking simulation studies, emphasizing that IDA can bind to ds-DNA preferably and confirmed experimental results. The reduced assay time and the possibility of measuring a single sample with another anticancer drug without any interference are significant advantages compared to the HPLC. The developed and validated sensor could be a valuable point-of-care diagnostic tool for IDA quantification in patients.
  • Publication
    The power of High Impact Amplitude Manipulation (HIAM) technique for extracting the basic spectra of two Fixed-dose combinations (FDC) -Spectrophotometric purity analysis via spectral contrast angle
    (2022-05-15T00:00:00Z) Saleh, Sarah S.; Lotfy, Hayam M.; TIRIS, GİZEM; ERK, NEVİN; El-Naem, Omnia A.; TIRIS, GİZEM
    © 2022 Elsevier B.V.HIAM technique allows the extraction of the original constant signal of each single component out of interference signals of a mixture and further transformed into basic spectrum (D0). It includes the methods: ratio subtraction coupled with unified constant subtraction (RS-UCS), constant center (CC) and constant extraction (CE). The technique was introduced for the analysis of two pharmaceutical formulations used to treat cardiovascular diseases. The formulations are binary combinations of Amlodipine (AML) with either Atorvastatin (ATR) or Candesartan (CND) which shows interefernce absorbance signals. The technique was valid over the linearity range of (5.0–35.0 µg/ml) for AML, ATR and CND with recovery percentage 100.40 ± 1.88, 100.00 ± 0.86 and 99.83 ± 1.07, respectively. The extracted signals were tested for its purity by spectral contrast angle (cos θ) to illustrate the efficency of the HIAM technique where cos θ values ranges from (0.9902 to 0.9986). The presented technique was fully validated regarding ICH guidelines and were statistically compared using one-way ANOVA at 95% confidence.