Person:
SARIALİOĞLU GÜNGÖR, AYÇA

Loading...
Profile Picture
Status
Kurumdan Ayrılmıştır
Organizational Units
Job Title
First Name
AYÇA
Last Name
SARIALİOĞLU GÜNGÖR
Name
Email Address
Birth Date

Search Results

Now showing 1 - 7 of 7
  • PublicationOpen Access
    Impact of a Surface Sealant Application on the Color Stability of a Nano-hybrid Composite Resin
    (2021-12-01T00:00:00Z) Sarıalioğlu Güngör, Ayça; Dönmez, Nazmiye; Kahya, Deniz Selin; Hergüner Siso, Şeyda; SARIALİOĞLU GÜNGÖR, AYÇA; DÖNMEZ, NAZMİYE
    Objective: Mouthwashes containing chlorhexidine can cause discoloration in restorative materials when used for the long-term. To prevent staining of a restorative material, several protective materials are used. The aim of this in vitro study was to evaluate the impact of a surface sealant on the color stability of a nano-hybrid composite resin material immersed in different mouthwashes. Methods: A total of 42 composite resin discs (10x2 mm) were prepared with a nano-hybrid composite resin (Herculite XRV Ultra) using Teflon moulds. The composite specimens were first divided into two groups (with or without a surface sealant) then into three subgroups (n=7) according to the mouthwashes (Gengigel, Oderol, and Chlorhex). After SS application to 21 specimens, all the discs were subjected to baseline color measurements using a spectrophotometer according to the Commission Internationale de l’Eclairage L*a*b* system. The specimens underwent thermal cycling. Following immersion in different mouthwashes for 24 hours, the color measurements were repeated. The ∆E data were assessed using Kruskal-Wallis one-way ANOVA. Mann-Whitney U test was performed for different immersion mouthwashes (p<0.5). Results: Statistically significant differences (p<0.5) were found between the unsealed composite specimens immersed in Chlorhex and the other mouthwashes in terms of ∆E values. The Chlorhex appeared to be associated with the most severe alteration in color (5.14±0.83), followed by Gengigel (2.21±1.46) and Oderol (1.94±1.75). There were no statistically significant differences (p>0.05) between the sealed and unsealed composite specimens in terms of the color changes. Conclusion: The application of a low viscosity liquid surface sealant material did not show the expected effect on the color stability of a nano-hybrid composite resin in terms of three different mouthwashes.
  • PublicationMetadata only
    Influence of Etching Mode and Composite Type on Bond Strength to Biodentine Using a -No-Wait- Universal Adhesive
    (2021-07-01T00:00:00Z) Sarıalioğlu Güngör, Ayça; Alim, Betül Aycan; SARIALİOĞLU GÜNGÖR, AYÇA; UYSAL, BETÜL AYCAN
  • PublicationOpen Access
    Perceptions of dental students towards online education during the COVID-19 pandemic
    (2021-12-01T00:00:00Z) Sarıalioğlu Güngör, Ayça; Şeşen Uslu, Yeşim; SARIALİOĞLU GÜNGÖR, AYÇA; DÖNMEZ, NAZMİYE
    Purpose: This study evaluated the usage habits, attitudes, and perceptions of undergraduate dental students toward distance (online) learning and identified variables related to those attitudes. Materials and methods: The study included 1,605 undergraduate dental students who participated voluntarily. The data collection tool consisted of a distance learning attitude scale, a questionnaire on personal information, and open-ended questions. The perceptions of dental students to distance education according to the year and type of dental school they attended were evaluated. Results: Most students expressed that distance learning in dental courses was not as effective as traditional face-to-face education (59.1%, n=949). While students studying at state universities had a more negative view of distance education, the satisfaction scores of the first-year students were found to be significantly lower than the other students (p<0.05). Conclusion: Dental students were generally unhappy with the interruption of traditional education caused by COVID-19 and having to continue their education online. However, under the circumstances, they saw it as an advantage allowing them to continue their education and avoid a complete suspension.
  • PublicationOpen Access
    Knowledge, stress levels, and clinical practice modifications of Turkish dentists due to COVID-19: a survey study
    (2021-03-01T00:00:00Z) Sarıalioğlu Güngör, Ayça; Dönmez, Nazmiye; Uslu, Yeşim Şeşen; SARIALİOĞLU GÜNGÖR, AYÇA; DÖNMEZ, NAZMİYE
    Dentists are exposed to the highest risk of occupational respiratory and droplet infections by working face-to-face with patients. The aim of this study was to investigate the knowledge of symptoms and modes of transmission of COVID-19, stress levels and clinical practice modifications of Turkish dentists during the COVID-19 pandemic. An online survey (15 questions) was sent to Turkish dentists from May 5 to 12 May, 2020. The survey comprised questions about dentists’ demographic characteristics, their knowledge about COVID-19, stress levels and the measures taken in dental clinics against COVID-19. This study included a total of 1,095 Turkish dentists. The data were expressed as frequency with percentage values for overall variables. Dentists were most familiar with high fever among the symptoms of COVID-19 (99.4%) and 99.2% of them reported that COVID-19 was transmitted with eye, mouth and nasal mucosa contact on surfaces contaminated with the droplets of infected persons. While the stress levels of females were higher than males, the stress levels of dentists with more than 20 years of professional experience were found to be lower. Regarding the precautions to be taken as a preventive measure when working again, 86.6% of the dentists took precautions by increasing daily patient care intervals and only 38.4% of the dentists wore an N95 mask. During this pandemic, knowing the conditions about when the treatments can be applied and the precautions to be taken will shed light on dentistry staff. Current recommendations of national authorities about the coronavirus should be followed.
  • PublicationOpen Access
    Comparison of the micro-tensile bond strengths of four different universal adhesives to caries-affected dentin after ER:YAG laser irradiation
    (2019-04-01) Donmez, NAZMİYE; Gungor, Ayca Sarialioglu; Karabulut, Baris; Siso, Seyda Herguner; DÖNMEZ, NAZMİYE; SARIALİOĞLU GÜNGÖR, AYÇA
    The micro-tensile bond strengths (micro-TBSs) of four universal adhesive systems, applied in two different bonding techniques, to carries-affected dentin after Er:YAG laser irradiation were investigated. Twenty-four extracted human molars were divided into four groups, according to the adhesive systems used. Each group was subdivided into two subgroups, depending on the bonding method used: the etch-and-rinse procedure or self-etch procedure. The carious lesions were irradiated using an Er:YAG laser. Resin composites were used to restore the adhesive-treated dentin surfaces. After 2,500 thermal cycles, the vertical composite resin-dentin sticks obtained were subjected to micro-TBS tests. One tooth in each group was examined using scanning electron microscopy (SEM). There were statistically significant differences (p<0.001) in micro-TBS values between universal adhesives. The results of this study suggested that universal adhesives applied both with self and total etch technique can be used for adhesive restorations to caries-affected dentin after Er:YAG laser irradiation. If lasers are preferred as a caries removal method, choosing a dentin bonding agent containing MDP may be recommended in clinical practice due to the property of increasing the bonding strength.
  • PublicationMetadata only
    Dentin erosion preventive effects of various plant extracts: An in vitro atomic force microscopy, scanning electron microscopy, and nanoindentation study
    (2020-12-01T00:00:00Z) DÖNMEZ, NAZMİYE; SARIALİOĞLU GÜNGÖR, AYÇA; SARIALİOĞLU GÜNGÖR, AYÇA; DÖNMEZ, NAZMİYE
    The overall consumption of acidic beverages has become more common, making the prevention and treatment of dental erosion an important consideration. The aim of this in vitro study was to evaluate the effect of various plant extracts in preventing dentin erosion. Seven experimental groups (fluoride-free water, fluoride-containing mouthwash [Colgate Plax], green tea, rosehip, clove, pomegranate, and grape seed) were formed, each consisting of 20 bovine dentin samples. The specimens were exposed daily to demineralization and remineralization cycles three times per day over 5 days through a 5-min plant extract application before each erosive episode. Surface roughness, nanohardness values, and morphological changes on dentin surfaces were examined using atomic force microscopy (AFM), nanoindentation, and scanning electron microscopy (SEM). The data were subjected to Kruskal-Wallis and Friedman tests (p .05). Macromolecular deposits were observed both in the SEM and AFM images of the pomegranate, Colgate, and rosehip groups. It can be concluded that the clove extract group is more successful in preventing dentin erosion than the other groups. Green tea is also effective in preventing dentin erosion, similar to clove extract.
  • PublicationOpen Access
    Effect of Trichloroacetic Acid on the Bond Strength of Calcium Silicate-Based Cements: A Modified Push-Out Test
    (2021-10-01T00:00:00Z) Alim, Betül Aycan; Sarıalioğlu Güngör, Ayça; UYSAL, BETÜL AYCAN; SARIALİOĞLU GÜNGÖR, AYÇA
    Objective: This study aimed to investigate the effect of trichloroacetic acid (TCA) on the bond strength of calcium silicate-based cements to dentin. Methods: Ten single-rooted bovine teeth were sectioned longitudinally into slices 2 mm thick. Six holes were drilled with a 1.2 mm diamond bur in each dentin slice (totally 60 holes). Cotton pellets with TCA were applied to three holes of each slice for 1 min, whereas no acid was applied to the other three. The TCA and non-TCA groups were divided into three subgroups according to the material used: ProRoot mineral trioxide aggregate [(MTA); n=10], Harvard MTA (n=10), and Biodentine (n=10). After seven days, the dislodgement resistance of the materials was calculated using a universal resting machine The types of bond failure were examined under a stereomicroscope. Results: The TCA had no statistically significant effect on the bonding strength of the tested materials (p>0.05). The Harvard MTA subgroup had the lowest mean bond strength values (2.25 +/- 0.79 MPa), while the Biodentine subgroup had the highest (10.49 +/- 3.32MPa). The most common bond failure types were mixed in the ProRoot MTA subgroup (60%) and cohesive in the Harvard MTA (60%) and Biodentine (70%) subgroups. Conclusion: The bond strength of Biodentine is greater than those of ProRoot and Harvard MTA. TCA does not affect the push-out bond strength of MTA or Biodentine.