Person: SARIALİOĞLU GÜNGÖR, AYÇA
Now showing 1 - 10 of 19
- PublicationOpen AccessKnowledge, stress levels, and clinical practice modifications of Turkish dentists due to COVID-19: a survey study(2021-03-01T00:00:00Z) Sarıalioğlu Güngör, Ayça; Dönmez, Nazmiye; Uslu, Yeşim Şeşen; SARIALİOĞLU GÜNGÖR, AYÇA; DÖNMEZ, NAZMİYEDentists are exposed to the highest risk of occupational respiratory and droplet infections by working face-to-face with patients. The aim of this study was to investigate the knowledge of symptoms and modes of transmission of COVID-19, stress levels and clinical practice modifications of Turkish dentists during the COVID-19 pandemic. An online survey (15 questions) was sent to Turkish dentists from May 5 to 12 May, 2020. The survey comprised questions about dentists’ demographic characteristics, their knowledge about COVID-19, stress levels and the measures taken in dental clinics against COVID-19. This study included a total of 1,095 Turkish dentists. The data were expressed as frequency with percentage values for overall variables. Dentists were most familiar with high fever among the symptoms of COVID-19 (99.4%) and 99.2% of them reported that COVID-19 was transmitted with eye, mouth and nasal mucosa contact on surfaces contaminated with the droplets of infected persons. While the stress levels of females were higher than males, the stress levels of dentists with more than 20 years of professional experience were found to be lower. Regarding the precautions to be taken as a preventive measure when working again, 86.6% of the dentists took precautions by increasing daily patient care intervals and only 38.4% of the dentists wore an N95 mask. During this pandemic, knowing the conditions about when the treatments can be applied and the precautions to be taken will shed light on dentistry staff. Current recommendations of national authorities about the coronavirus should be followed.
- PublicationMetadata onlyBitkisel Özütlerle Dental Erozyonu Önlemek Mümkün Mü?: In Vitro Çalışma(2019-12-06T00:00:00Z) Sarıalioğlu Güngör, Ayça; Dönmez, Nazmiye; SARIALİOĞLU GÜNGÖR, AYÇA; DÖNMEZ, NAZMİYE
- PublicationMetadata onlyEffects of Vitamin C on Surface Roughness, Microhardness and Color Stability of Composite Resins(2021-09-16T00:00:00Z) Sarıalioğlu Güngör, Ayça; Değer, Ceren; SARIALİOĞLU GÜNGÖR, AYÇAObjectives: The study assessed the changes in color stability, surface roughness and microhardness of three esthetic composite-resin materials after immersed in different effervescent vitamin C tablets.Methods: Three different types of composite resins were investigated: supra-nano hybrid composite, microfilled hybrid composite, and nanofilled composite resins. Ninety disc-shaped specimens (4-mm diameter, 2-mm thickness) were fabricated using Teflon mold and divided into three groups according to the immersion solution (Redoxon, Sambucol, and distilled water as control) for both composite resins (n=10). The top surface of specimens was ground with 600 grit silicon carbide paper for the standardization. Each group was immersed in the solutions for 24 hours. Surface roughness (Ra, mm) was measured by contact profilometer, while the hardness was measured by Vickers hardness (HV) test. CIE L*a*b* coordinates were recorded by using spectrophotometer and color difference analysis (ΔE) was made using the CIEDE-2000 formula. Data were statistically analyzed using two-way ANOVA and Bonferroni correction test (p<0.05).Results: No significant differences in surface roughness change were recorded according to the immersion solutions for both composite resin groups (p>0.05). However, there were significant differences in ΔHV of all composite resins among the control group and the effervescent vitamin C tablets (p<0.001). Highest microhardness decrease was obtained in supra-nano hybrid composite specimens when immersed in Redoxon (-8.49±1.62). Statistically significant differences (p<0.001) were found between the composite specimens immersed in the solutions in terms of ΔE values. Redoxon appeared to be associated with the most severe alteration in color (4.86±0.63).Conclusions: Using vitamin C effervescent tablets did not have a significant change in the surface roughness values of the composite resins. However, microhardness values of all composite resin specimens were reduced. Clinically unacceptable discoloration was observed only in micro-filled hybrid composite specimens immersed in Redoxon.
- PublicationOpen AccessComparison of the micro-tensile bond strengths of four different universal adhesives to caries-affected dentin after ER:YAG laser irradiation(2019-04-01) Donmez, NAZMİYE; Gungor, Ayca Sarialioglu; Karabulut, Baris; Siso, Seyda Herguner; DÖNMEZ, NAZMİYE; SARIALİOĞLU GÜNGÖR, AYÇAThe micro-tensile bond strengths (micro-TBSs) of four universal adhesive systems, applied in two different bonding techniques, to carries-affected dentin after Er:YAG laser irradiation were investigated. Twenty-four extracted human molars were divided into four groups, according to the adhesive systems used. Each group was subdivided into two subgroups, depending on the bonding method used: the etch-and-rinse procedure or self-etch procedure. The carious lesions were irradiated using an Er:YAG laser. Resin composites were used to restore the adhesive-treated dentin surfaces. After 2,500 thermal cycles, the vertical composite resin-dentin sticks obtained were subjected to micro-TBS tests. One tooth in each group was examined using scanning electron microscopy (SEM). There were statistically significant differences (p<0.001) in micro-TBS values between universal adhesives. The results of this study suggested that universal adhesives applied both with self and total etch technique can be used for adhesive restorations to caries-affected dentin after Er:YAG laser irradiation. If lasers are preferred as a caries removal method, choosing a dentin bonding agent containing MDP may be recommended in clinical practice due to the property of increasing the bonding strength.
- PublicationMetadata onlyDentin erosion preventive effects of various plant extracts: An in vitro atomic force microscopy, scanning electron microscopy, and nanoindentation study(2020-12-01T00:00:00Z) DÖNMEZ, NAZMİYE; SARIALİOĞLU GÜNGÖR, AYÇA; SARIALİOĞLU GÜNGÖR, AYÇA; DÖNMEZ, NAZMİYEThe overall consumption of acidic beverages has become more common, making the prevention and treatment of dental erosion an important consideration. The aim of this in vitro study was to evaluate the effect of various plant extracts in preventing dentin erosion. Seven experimental groups (fluoride-free water, fluoride-containing mouthwash [Colgate Plax], green tea, rosehip, clove, pomegranate, and grape seed) were formed, each consisting of 20 bovine dentin samples. The specimens were exposed daily to demineralization and remineralization cycles three times per day over 5 days through a 5-min plant extract application before each erosive episode. Surface roughness, nanohardness values, and morphological changes on dentin surfaces were examined using atomic force microscopy (AFM), nanoindentation, and scanning electron microscopy (SEM). The data were subjected to Kruskal-Wallis and Friedman tests (p .05). Macromolecular deposits were observed both in the SEM and AFM images of the pomegranate, Colgate, and rosehip groups. It can be concluded that the clove extract group is more successful in preventing dentin erosion than the other groups. Green tea is also effective in preventing dentin erosion, similar to clove extract.
- PublicationMetadata onlyEvaluating Cytotoxicity of Dentin Bonding Adhesive Systems on Human Dental Pulp Stem Cells(2022-04-23T00:00:00Z) Kazak, Mağrur; Sarıalioğlu Güngör, Ayça; Özman, Zeynep; Dönmez, Nazmiye; SARIALİOĞLU GÜNGÖR, AYÇA; ÖZMAN, ZEYNEP; DÖNMEZ, NAZMİYE
- PublicationMetadata onlyTürkiye-deki Diş Hekimleri ve Hastaların Tele-Diş Hekimliğine İlişkin Bilgi ve Farkındalıklarının Değerlendirilmesi(2021-10-07T00:00:00Z) Özveren, Neslihan; Sevinç, Büşra; Sarıalioğlu Güngör, Ayça; Baltacı, Ezgi; Özgür, Özge; SARIALİOĞLU GÜNGÖR, AYÇA
- PublicationMetadata onlyPreventing Dentin Erosion By Using Plants? : An In Vitro Study.(2018-07-27T00:00:00Z) Sarıalioğlu Güngör, Ayça; Dönmez, Nazmiye; SARIALİOĞLU GÜNGÖR, AYÇA; DÖNMEZ, NAZMİYE
- PublicationOpen AccessImpact of a Surface Sealant Application on the Color Stability of a Nano-hybrid Composite Resin(2021-12-01T00:00:00Z) Sarıalioğlu Güngör, Ayça; Dönmez, Nazmiye; Kahya, Deniz Selin; Hergüner Siso, Şeyda; SARIALİOĞLU GÜNGÖR, AYÇA; DÖNMEZ, NAZMİYEObjective: Mouthwashes containing chlorhexidine can cause discoloration in restorative materials when used for the long-term. To prevent staining of a restorative material, several protective materials are used. The aim of this in vitro study was to evaluate the impact of a surface sealant on the color stability of a nano-hybrid composite resin material immersed in different mouthwashes. Methods: A total of 42 composite resin discs (10x2 mm) were prepared with a nano-hybrid composite resin (Herculite XRV Ultra) using Teflon moulds. The composite specimens were first divided into two groups (with or without a surface sealant) then into three subgroups (n=7) according to the mouthwashes (Gengigel, Oderol, and Chlorhex). After SS application to 21 specimens, all the discs were subjected to baseline color measurements using a spectrophotometer according to the Commission Internationale de l’Eclairage L*a*b* system. The specimens underwent thermal cycling. Following immersion in different mouthwashes for 24 hours, the color measurements were repeated. The ∆E data were assessed using Kruskal-Wallis one-way ANOVA. Mann-Whitney U test was performed for different immersion mouthwashes (p<0.5). Results: Statistically significant differences (p<0.5) were found between the unsealed composite specimens immersed in Chlorhex and the other mouthwashes in terms of ∆E values. The Chlorhex appeared to be associated with the most severe alteration in color (5.14±0.83), followed by Gengigel (2.21±1.46) and Oderol (1.94±1.75). There were no statistically significant differences (p>0.05) between the sealed and unsealed composite specimens in terms of the color changes. Conclusion: The application of a low viscosity liquid surface sealant material did not show the expected effect on the color stability of a nano-hybrid composite resin in terms of three different mouthwashes.
- PublicationMetadata onlyInfluence of Etching Mode and Composite Type on Bond Strength to Biodentine Using a -No-Wait- Universal Adhesive(2021-07-01T00:00:00Z) Sarıalioğlu Güngör, Ayça; Alim, Betül Aycan; SARIALİOĞLU GÜNGÖR, AYÇA; UYSAL, BETÜL AYCAN